- 0
OBD 1 faults check through the SRS , ABS and Tyre pressure indicators , using error codes
Asked by
Asanka Pubudu,
AutoLanka Cars For Sale
Post Your Ad Free [Click Here]
-
Recent Status Updates
-
YW Creations Y Studio » AVANTE
Hi @AVANTE I saw you comprehensive answer on Peugeot 406. So I submit a question and if you could, could you have a look on my post(· 0 replies
) I would like to have your opinion on that. So my obvious choice was Peugeot 406 D9 diesel one. but what i heard was, probability of some one selling it due to considerable issues, and it has hard time of reselling and repairing and spare pats finding and cost may considerably high. Seeking advice on this.
Thank you
-
Chinese are going to take over the automobile industry for sure. Tesla who was considered ground braking is shying away from the promised small EV and moving to Taxi cars as the competition is too strong. Then comes Chery with this small EV SUV. Looks like a Mini G Class / Jimny but is fully electric.· 4 replies
-
Interior Specialists? Every time I go over some bumps my seats squeak quite loudly and there is a massive rattle of a nail undone coming from inside the dashboard, anybody got any suggestions I could go to? My usual mechanic just said "turn the radio up"· 2 replies
-
I was watching a Yangwang U8 struggling to make it up a muddy hill on Youtube. I was wondering why cant an EV be more capable off road than an ICE vehicle. Given the fact that this behemoth has 4 individual motor on each wheel it should be able to direct power to the wheel that has more grip and stop power to the slipping wheel. Cant be rocket science right?· 3 replies
-
Albums
-
Giko's Clicks
- By Giko,
- 0
- 0
- 75
-
Street2Track Mirigama 2022 (Sep 17th)
- By Giko,
- 0
- 0
- 25
-
Pannala Road Race 2016 (Dec 4th)
- By Giko,
- 0
- 0
- 4
-
Katukurunda Speed 2022 (Dec 4th)
- By Giko,
- 0
- 0
- 10
-
Concourse of Elegance 2020 - Hampton Court, United Kingdom
- By Crosswind,
- 3
- 0
- 90
-
-
Blog Entries
-
Recent Topics
Question
Asanka Pubudu
Is this method right or wrong?
Also i couldn't finds OBD 1 SRS,ABS and Tyre pressure indicators fault codes list.
Reading ABS codes
Turn the ignition on.
Connect the leads "TC" and "E1" of the DLC1 connector.
Remove the jumper from the "WA" and "WB" terminals.
After 4 seconds, read the code for the number of flashes of the ABS indicator.
Remove the jumper from the terminals "TC" and "E1".
Set the jumper on the "WA" and "WB" terminals.
Resetting ABS codes
Turn the ignition on.
Bring the conclusions of "TC" and "E1"
Press the brake pedal eight or more times in the interval of three seconds.
The indicator should output the normal code (flashing 2 times per second).
Turn the ignition off.
Remove the jumper from the terminals "TC" and "E1".
Make sure that the ABS indicator goes out.
The SRS (Toyota) self-diagnosis codes are read in the same way as the number of "SRS" indicator flashes with the closed terminals "TC" - "E1". Erasing codes must occur when the ignition is switched off. If the codes are saved, a cleaning procedure must be carried out.
The tire pressure monitoring system provides its own self-diagnosis. The codes are read in the standard way for Toyot's by the number of indicator flashes with the ignition on and the closed terminals "TC" and "E1". Removal of codes is carried out in the same way as deleting the codes of the ABS system.
Link to comment
Share on other sites
8 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.