Search the Community
Showing results for tags 'cupholder'.
Found 1 result
Found this thread on uklegacy.com http://www.uklegacy.com/forums/index.php/topic/130098-how-to-fix-gen3-jdm-cup-holder/ credit to this guy for doing this… I went a step further with all around images with his thread and images as well as my own. You will need: Cup of tea (I had to as well… what to do it was my tea time) Phillips headed screwdriver Paperclips (possibly) Pliers Step 1. Sip the tea Lol…. Step 2. Remove the center console area which is easy. 2 screws located under the armrest lid, a further 2 underneath the gear stick surround (Top most corner). Carefully remove the center console trim show below. IF it’s a manual tranny hopefully it should be the same technique. Start from the bottom corner of the trim and gently lift them up Step 3: Remove the cup holder and mechanism from the trim. 3 bolts in total underneath. Step 4: Yup I too had to stare a bit to wrap my head around how this was to be done. Sadly found that a piece of the cup holder was broken off (the bottom half of the lid) but for now needed to have the open flap fixed.