Search the Community

Dear all, looking for some clue from experienced or from experts Car : Lancer box Brake pads & liners replaced 6 months ago, at the same time overhauled the complete brake system. Overhaul includes; polishing caliper pistons flushing brake oil line replaced new caliper washer replaced all washers (including oil seal) replaced most of the 'factory fitted' tiny winy parts also new master pump with servo (heavier) finally filled with fresh 'lockheed' oil at the end did the air bleeding also. Braking improved drastically, better than compared to my 2003 kia. But one thing is persisted since then. when I apply brake car pulls to right. If I apply brake suddenly steering pulls to right heavily. So again visited the mechanic. As he suggested to replace the bearings, I've replaced the all 4 bearing in the front. still problem didn't solved at all. Again took the car to the mechanic last week and replaced the caliper pistons with brand new one both side. Now the wheels can be spinned freely by hand (both wheels spins freely-almost same stoppage time) But still steering pulls to the right heavily when applying brake. Now I'm clueless. Please shed some experience and knowledge