cmxjn

that's true

Recently I saw a guy who pumped a full tank and put soltron to his hybrid

good one

May be chathurike is from galle, may be thoppigala. who knows really just becoz the profile read kandy? Looks like bmw1990 and shammika are badly hurt working mates

Looks like bmw owns this place or works for it or has shares.

Good thought Vortex

Those problems were with samsung laptops. aren't they branded stuff? They boast that they (P# Ho#se) are agents for those laptops.

carboy> The rubber mats @ arpico. No Idea about the prices though I think rubber mats costs abt lkr 3000

Have you noticed how heavy those rubber mat sets are? Its very heavy. I think in the long run lighter mats are better.

Have u guys had any experience at Ceypetco, Nawinna?

mini, it's obvious that lpg is cheaper, but you can get more milage using gasoline than same amount of lpg i mean auto gas. i'm not sure by how much.

love it. cool stuff mate. keep it up.

Hi, Do Wheel balancing. I had the same problem. Wheel balancing eliminated the problem.

Both

§ 569.1 Purpose and scope. top This part sets forth the conditions under which regrooved and regroovable tires manufactured or regrooved after the effective date of the regulation may be sold, offered for sale, introduced for sale or delivered for introduction into interstate commerce. [42 FR 21613, Apr. 28, 1977] § 569.3 Definitions. top (a) Statutory definitions. All terms used in this part that are defined in section 102 of the National Traffic and Motor Vehicle Safety Act of 1966 (15 U.S.C. 1391) are used as defined in the Act. ( Motor Vehicle Safety Standard definitions. Unless otherwise indicated, all terms used in this part that are defined in the Motor Vehicle Safety Standards, part 571, of this subchapter (hereinafter “The Standards”), are used as defined therein without regard to the applicability of a standard in which a definition is contained. © Regroovable tire means a tire, either original tread or retread, designed and constructed with sufficient tread material to permit renewal of the tread pattern or the generation of a new tread pattern in a manner which conforms to this part. (d) Regrooved tire means a tire, either original tread or retread, on which the tread pattern has been renewed or a new tread has been produced by cutting into the tread of a worn tire to a depth equal to or deeper than the molded original groove depth. [34 FR 1150, Jan. 24, 1969. Redesignated at 35 FR 5118, Mar. 26, 1970] § 569.5 Applicability. top (a) General. Except as provided in paragraph ( of this section, this part applies to all motor vehicle regrooved or regroovable tires manufactured or regrooved after the effective date of the regulation. ( Export. This part does not apply to regrooved or regroovable tires intended solely for export and so labeled or tagged. [34 FR 1150, Jan. 24, 1969. Redesignated at 35 FR 5118, Mar. 26, 1970] § 569.7 Requirements. top (a) Regrooved tires. (1) Except as permitted by paragraph (a)(2) of this section, no person shall sell, offer for sale, or introduce or deliver for introduction into interstate commerce regrooved tires produced by removing rubber from the surface of a worn tire tread to generate a new tread pattern. Any person who regrooves tires and leases them to owners or operators of motor vehicles and any person who regrooves his own tires for use on motor vehicles is considered to be a person delivering for introduction into interstate commerce within the meaning of this part. (2) A regrooved tire may be sold, offered for sale, or introduced for sale or delivered for introduction into interstate commerce only if it conforms to each of the following requirements: (i) The tire being regrooved shall be a regroovable tire; (ii) After regrooving, cord material below the grooves shall have a protective covering of tread material at least 3/32-inch thick; (iii) After regrooving, the new grooves generated into the tread material and any residual original molded tread groove which is at or below the new regrooved depth shall have a minimum of 90 linear inches of tread edges per linear foot of the circumference; (iv) After regrooving, the new groove width generated into the tread material shall be a minimum of 3/16-inch and a maximum of 5/16-inch; (v) After regrooving, all new grooves cut into the tread shall provide unobstructed fluid escape passages; and (vi) After regrooving, the tire shall not contain any of the following defects, as determined by a visual examination of the tire either mounted on the rim, or dismounted, whichever is applicable: (A) Cracking which extends to the fabric, ( Groove cracks or wear extending to the fabric, or © Evidence of ply, tread, or sidewall separation; (vii) If the tire is siped by cutting the tread surface without removing rubber, the tire cord material shall not be damaged as a result of the siping process, and no sipe shall be deeper than the original or retread groove depth. ( Siped regroovable tires. No person shall sell, offer for sale, or introduce for sale or deliver for introduction into interstate commerce a regroovable tire that has been siped by cutting the tread surface without removing rubber if the tire cord material is damaged as a result of the siping process, or if the tire is siped deeper than the original or retread groove depth. [39 FR 15039, Apr. 30, 1974, as amended at 42 FR 21613, Apr. 28, 1977] § 569.9 Labeling of regroovable tires. top (a) Regroovable tires. After August 30, 1969, each tire designed and constructed for regrooving shall be labeled on both sidewalls with the word “Regroovable” molded on or into the tire in raised or recessed letters 0.025 to 0.040 inch. The word “Regroovable” shall be in letters 0.38 to 0.50 inch in height and not less than 4 inches and not more than 6 inches in length. The lettering shall be located in the sidewall of the tire between the maximum section width and the bead in an area which will not be obstructed by the rim flange. [34 FR 1150, Jan. 24, 1969; 34 FR 1830, Feb. 7, 1969] Courtesy -http://law.justia.com/cfr/title49/49-6.1.2.3.34.html This the US laws on re-grooved tires. do u guys think Sri lanka has any similar rules? Those re-grooved tire standards in SL are closer to those US standards atleast??

Hi kmeeg, The whole story was about branded stuff. 2 s#ms#ng laptops. Got a assembled desktop myself but all from used parts. Fetched the parts from a place called J comp#ters narahenpita.

Hi! you guys have had any experiences with PC vendors specially with after sales service (warranty etc..)?? 2 warranty claims with them. 1. 1 laptop i brought from Dubai gave me troubles. It was under International warranty and i gave to PC Ho#se to fix it. What they did was they kept the computer with them for 1 month and did nothing. They never give a feed back. I used to call every week and ask for an update. Their normal answer is "the pc is sent to s'pore and in a few weeks it will be ok".Next day i called them and told that i'll collect the computer, to my surprise they said ok. How come it come to SL next day?? so They are basically liars for customers. I talked to the manager about this. He seemed like "I don't give a shi!!". The staff from the bottom to the top is with this attitude. 2. 2nd pc also gave some problems gave to them as usual.This was purchased from PC Ho#se it self. As usual "the pc is sent to s'pore and in a few weeks it will be ok" it took more than 6 weeks. Even when i talked to the manager they try to slip away. Like "sir i'll call in 1 hr with the update" they never show up again. Finally one day they called me and told to collect the computer next day. so next afternoon i went to collect, guess what the pc is not ready "PC eka iye hawasa awe". what an answer. Irresponsible from the tip to toe. So Guy Stay FAR FAR AWAY from these Ho#se buggers.

0117607200 head office col-10

i got the same response from c-ylin-o V-p. damn they treat like we r robbers. i turned my back on them. it was my 1st and last. sticking with slic, now happy so far :-)

Shintarox, there's no hole in the fuel tank. could the gas escape by means of vapor. what are the possibilities for it to happen if the topup lid for the tank is well intact?

well its not loud. the car has a high fuel consumption say 7kmpl. A FN14 1.5 ltr

Hi! do you guys know how bad a half a centimeter hole on a exhaust muffler could be?

dear chew, just call 1919 by any phone and ask all your questions. The Information is free.

y don't u find ur specs here?? http://www.cars-directory.net/specs/nissan/sunny/