Jump to content

Leaderboard


Popular Content

Showing content with the highest reputation since 11/30/2019 in Blog Comments

  1. 2 points
    After sanding the primer, applied the filler coat. Gray color filler applied on the body shell. Later thought to use white color filler as the top coat will be white.
  2. 1 point
    Impressive work there @kusumsiri!
  3. 1 point
    Simply wow... i'm sure moggie will look better than a CBG- number Axio or something
  4. 1 point
    Body filling was the next step. Unfortunately I have only few pictures of this step. Anyhow followed the above video instructions throughout the filling process. Additionally applied putty on top of filled areas and small scratches. After all preparation applied the primer coat. Below images are after sanding the primer coat.
  5. 1 point
    Update : Repairing the gearbox The second gear popped out several times while carrying the car to home. Also 1st gear had a bad noise. So decided to open the box and check. This is my first experience of repairing a gearbox. So went through the workshop manual few times before try it. But it was not that much complex as I thought . Above images are the initial status of gearbox. Firstly noticed that there was very low oil amount inside it while manual says its 1.3 liters. The speedometer cable & drive pinion was missing and that could be the reason to fill oil partially. These pictures shows casing, rare cover, second motion shaft, three shifter shafts & gear selectors. Replaced the first motion shaft razor RLS 8. All other parts was in good shape. But there was enough dirt inside the box. So cleaned everything and washed with kerosene oil. Finally could not find packing set even from S**ana motors, Panchikawatta. So had to prepare all packing myself.
This leaderboard is set to Colombo/GMT+05:30


  • Newsletter

    Want to keep up to date with all our latest news and information?

    Sign Up
×